Which lifting motions cause the most back pain in a warehouse?

Lies Decock ·

The lifting movements that cause the most back pain in a warehouse are twisting the torso while lifting, lifting with arms extended far from the body, and lifting heavy loads from a bent-over position without bending the knees. These combinations of strain and poor posture put extreme pressure on the intervertebral discs and the back muscles. In this article, we answer the most frequently asked questions about back pain caused by lifting in a warehouse and explain how ergonomic aids can structurally reduce the risk.

Which muscles and structures are strained during heavy lifting?

When lifting heavy objects, the back extensors, the intervertebral discs, the ligaments of the spine, and the hip flexors are all strained at the same time. The back extensors must keep the torso upright while simultaneously supporting a load. The intervertebral discs act as shock absorbers and bear the compressive forces generated during every lifting movement. When these forces become too great or are repeated too often, the risk of back problems increases rapidly.

The spine is made up of vertebrae separated from one another by intervertebral discs. These discs consist of a fibrous outer ring and a gel-like core. When subjected to excessive strain, the outer ring can tear, causing the core to protrude and press on a nerve. This is what is known as a herniated disc, one of the most common serious back conditions among warehouse workers.

In addition to the spine, the gluteal muscles and hamstrings also play a role in proper lifting. When employees do not actively engage these muscles, the pressure on the lower back increases disproportionately. Fatigue in these supporting muscle groups makes the spine more vulnerable, especially at the end of a long work shift.

Which specific lifting movements cause the most damage?

The most harmful lifting movements involve combining bending and twisting, lifting with straight arms at a great distance from the body, and lifting loads from a low position without bending the knees. Each of these movements exponentially increases the strain on the lumbar spine compared to a neutral, controlled lifting motion.

Turning the torso while holding a load is particularly dangerous because it subjects the intervertebral discs to both pressure and torsion. This combination is responsible for a large proportion of acute back injuries in warehouses. It often occurs when employees move a pallet or box from a conveyor belt to a rack without turning their feet as well.

Lifting with straight arms significantly increases the effective load that the back muscles must support. The farther a load is held from the body, the greater the leverage effect on the lower back. A 10-kilogram load held at arm’s length can place a strain on the lower back equivalent to three to four times that weight.

Lifting from a low position without bending the knees—also known as the “tree trunk bend”—places maximum strain on the back extensors at a time when they are already in a shortened position. From a mechanical standpoint, this is the most unfavorable situation for the intervertebral discs and a common cause of acute back pain during lifting.

Less effort, more performance

Lift more efficiently with ergonomic lifting solutions. Our specialists are happy to work with you to find the right solution.

How can we help you?

How does the risk vary depending on the type of load in a warehouse?

The risk of back problems in a warehouse varies greatly depending on the type of load. Irregular loads, such as bags and barrels, pose a greater risk than symmetrical loads, such as boxes, because their center of gravity is more difficult to control. Furthermore, loads without good gripping points force employees into unnatural postures that increase the strain on their backs.

Bags containing loose materials such as grain or sand are particularly taxing because their contents shift while being lifted. This causes the center of gravity to shift unexpectedly, forcing the back muscles to constantly adjust. Ergonomic support is therefore strongly recommended when handling bags.

Drums and rolls are heavy and have a round shape that makes them difficult to grip. When handling drums and rolls, there is a high risk of sudden movement, which increases the likelihood of an acute back injury. Sheets and panels, on the other hand, are dangerous because they are large and unwieldy, often forcing employees to hold them far away from their bodies.

In theory, boxes are the easiest loads to handle, but even here, repetitive movements pose a risk. During intensive box handling over the course of an entire shift, the cumulative strain on the spine builds up, even if each individual weight is limited. It is the frequency combined with the weight that causes the damage.

When are lifting movements most risky during a workday?

Lifting movements pose the greatest risk at the start of the workday, when muscles and joints have not yet warmed up, and at the end of the shift, when fatigue reduces muscle stability. In both cases, the spine is less well protected, which means that the same lifting movement can cause more damage than it would in the middle of the day.

At the start of the workday, the intervertebral discs are stiffer and less flexible. Blood flow to the back muscles is not yet optimal, and coordination between muscle groups is less precise. A sudden, heavy lifting motion without a warm-up can quickly lead to acute back pain or a muscle tear during this phase.

Fatigue at the end of a shift is another critical factor. When the stabilizing muscles around the spine become exhausted, the spine itself takes on more of the load. Employees are also more likely to lift improperly when they are tired: they bend their knees less, twist their torsos more quickly, and hold loads farther away from their bodies. These are precisely the risk factors that contribute to back pain in a warehouse.

Peak periods during the workday—such as times when multiple deliveries are being processed simultaneously—also pose a risk. Time pressure leads to rushed lifting movements, during which proper technique is quickly abandoned. Ergonomic lifting in a warehouse therefore requires structural measures, not just instructions on proper posture.

How can ergonomic lifting aids reduce back pain?

Ergonomic lifting aids reduce back pain in a warehouse by systematically reducing the physical strain on employees. Instead of relying on individual employees to maintain proper lifting posture, the equipment takes over the critical lifting tasks. This includes lifting, carrying loads away from the body, and turning while handling heavy loads—precisely the movements that cause the most back injuries.

Vacuum lifters are an effective example: they grip a load and lift it using vacuum pressure, so that the employee only needs to guide and position the load. This places virtually no strain on the back muscles. Vacuum lifters and hoists are available for a wide range of applications, from sheets to boxes.

Mobile lifters and pallet trucks completely take over the vertical lifting work involved in moving pallets. Not only do they reduce strain on the back, but they also increase efficiency because multiple loads can be moved at the same time. The combination of reduced physical strain and higher productivity makes these mobile lifters a valuable investment.

Ergonomic aids are most effective when they are tailored to the specific tasks and workloads within a warehouse. A generic solution does not always solve the specific problem. That is why a thorough analysis of the workstation is the first step toward effectively addressing back pain caused by lifting.

How Logitrans Handling Helps Prevent Back Pain in the Warehouse

At Logitrans Handling, we guide companies through the process—from analysis to implementation—as they address lifting tasks that cause back pain in a warehouse. Our approach is practical and tailored to each client’s needs:

  • Free Workstation Analysis: Our specialists identify the most high-risk lifting operations in your warehouse and recommend tailored solutions.
  • Wide range of products: from vacuum lifters and mobile lifters to pallet trucks and pulling aids, for every type of load and every application.
  • Demonstration area in Drongen: You can test our lifting solutions with your own materials before making a decision.
  • Training during installation: We ensure that employees use the equipment correctly and safely from day one.
  • Maintenance Contracts: Through our service department, we keep your equipment in top condition to ensure continued safety.

Ergonomic work practices are not a one-time effort but an ongoing process. Would you like to know which lifting movements in your warehouse pose the greatest risk and how you can address this systematically? If so, please contact us for a no-obligation consultation.

Less effort, more performance

Lift more efficiently with ergonomic lifting solutions. Our specialists are happy to work with you to find the right solution.

How can we help you?

Related Articles