How do you change a pallet without tipping the load?

Lies Decock ·

You can change a pallet without tipping the load using a pallet changer or pallet inverter—a device that clamps the load and transfers it to a new pallet. Another option is to move the load layer by layer using a lift truck. The appropriate method depends on the weight, stability, and packaging of the load.
Below, you’ll learn about the available methods, how a pallet inverter works, when a swap is truly necessary, and which pallet changer is right for your load.

What methods are there for changing a pallet without tipping it over?

There are four common methods for changing a pallet without tipping the load: a pallet changer or pallet inverter, a mobile lifter, layer-by-layer transfer using a vacuum lifter, and manual restacking. The first three reduce physical strain and the risk of damage. The last method is only feasible for light, small loads.

Each method has its own advantages and limitations:

  • Pallet changer or pallet inverter: secures the entire load and transfers it to a new pallet in a single motion. Ideal for heavy and stable loads.
  • Mobile pallet jack: Lifts the load off the damaged pallet, allowing you to replace the pallet from underneath. Versatile for use in various work areas.
  • Layer-by-layer transfer using a vacuum lifter: moves boxes or bags layer by layer onto the new pallet. Suitable for mixed or unstable loads.
  • Manual restacking: only practical for lightweight products, but time-consuming and hard on the back.

Ergonomic pallet handling means choosing the method that minimizes the physical strain on your employees without increasing turnaround time. For heavier or more frequent handling tasks, a mechanical solution is almost always the best choice.

How does a pallet inverter work when changing pallets?

A pallet inverter clamps the load, along with the pallet, between two plates and rotates them completely. You then slide the old pallet away and place a new one, after which the load returns in a second rotational movement. In some models, the machine transfers the load directly to a new pallet.

The process typically involves the following steps:

  1. Place the loaded pallet into the machine.
  2. The clamping plates close and hold the load securely in place.
  3. The machine rotates the load 180 degrees so that the pallet ends up on top.
  4. Remove the old pallet and have a new or inspected pallet ready.
  5. The load has been turned around and is now resting on the new pallet.

The advantage is that the products are never moved separately. The load remains intact as a single unit, which minimizes the risk of damage. Even if the load tilts or rotates in certain areas, nothing shifts out of place, thanks to the clamping pressure. You can find more information about the different models on our pallet inverters.

When is it really necessary to replace a pallet?

Replacing a pallet is necessary when the pallet is damaged, does not meet transportation standards, or is not suitable for the next step in the supply chain. Examples include broken boards, damp or dirty pallets, export regulations, or switching between disposable and returnable pallets.

The most common reasons are:

  • Replace a damaged pallet: broken or loose boards make stacking and transport unsafe.
  • Hygiene and quality: In the food or pharmaceutical industries, pallets must be clean and suitable for the environment.
  • Export regulations: Some destinations require treated or certified pallets.
  • Pallet pooling: Those who work with borrowed or pooled pallets often exchange them with each transfer.
  • Dimensions: A non-standard size will not fit on a warehouse shelf or on a conveyor belt.

A visual inspection upon receipt helps you make a timely decision. Don’t wait until a pallet collapses during transport, because the damage to the cargo and the vehicle is usually greater than the cost of replacing it. For more information on handling pallets, see our pallet handling applications.

What are the risks associated with manually changing pallets?

Manually changing pallets poses risks primarily of back and shoulder injuries, the risk of getting pinched, and damage to the cargo. Lifting, bending, and twisting while carrying heavy loads places an unnecessary strain on employees. If a pallet is damaged, this is compounded by instability.

The main risks at a glance:

  • Physical strain: Repeated lifting and bending can eventually lead to back problems and absenteeism.
  • Injuries caused by unstable cargo: Cargo that shifts or tips over can strike employees.
  • Pinching: Hands and feet can get caught when pulling a pallet out from under someone.
  • Product damage: Loose items increase the risk of broken or damaged goods.
  • Time loss: Manual restacking takes much longer than a mechanical switch.

A good ergonomic solution takes over the lifting work, so that employees only need to operate and monitor the equipment. This reduces the risk of absenteeism and allows for more flexible staffing.

Which pallet changer is best suited for which type of load?

The right pallet changer depends on the weight, stability, and packaging of the load. Stable, heavy, and stacked loads are best suited for a pallet inverter. Loose or irregular products require a lifter, which moves them layer by layer or piece by piece.

You can use this outline as a guide:

  • Heavy, stable loads in boxes or wrapped in plastic: a pallet inverter with clamping plates that flips the entire load over.
  • Boxes and crates: A vacuum lifter moves them layer by layer without tipping them over.
  • Varying or light loads at different workstations: a mobile lift offers flexibility without the need for a fixed setup.
  • High volumes and repetitive changes: an automated or semi-automated solution saves time and reduces staffing needs.

It’s best to test the solution with your own products. That way, you’ll immediately see whether the clamping pressure, rotation speed, and controls align with your workflow. A workstation analysis will help you determine which machine offers the best results for your situation.

How Logitrans Handling Helps Change Pallets Without Tipping Them Over

At Logitrans Handling, we operate on a single principle: an ergonomic solution must solve a problem, not create new ones. We work with you to find the method that best suits your cargo, your space, and your workflow.

Specifically, you can count on us to provide:

  • a free workstation analysis, during which our specialists will assess your pallet changes;
  • advice on pallet inverters, lifters, and custom semi-automatic solutions;
  • Try it out with your own equipment in our demo room in Drongen;
  • user training upon installation or delivery;
  • maintenance and a maintenance contract, so that your equipment remains safe and operational.

Would you like to know which solution is best suited for your pallets and loads? Feel free to contact us, and we’ll work with you to determine what makes the difference for you.

Related Articles