A hygienic production environment requires a stainless steel (AISI 304 or 316) pallet truck with smooth, closed welds, corrosion-resistant wheels and bearings, and a design that can withstand wet cleaning. Which model is suitable depends on how often and how aggressively you clean, as well as the industry in which you operate.
For drier environments, a partially stainless steel model is often sufficient, while washdown areas in the food or pharmaceutical industries require a fully stainless steel model. Below, we answer the most important questions companies ask when choosing a stainless steel pallet truck.
What requirements must a pallet truck meet in a hygienic production environment?
A hygienic production environment requires a pallet truck that does not harbor bacteria, dirt, or moisture, is resistant to cleaning and disinfecting agents, and does not release any particles itself. The choice of materials, finish, and construction collectively determine whether the truck is safe for use in the food industry, the pharmaceutical industry, or a cleanroom.
Specifically, companies pay attention to the following points:
- Material: stainless steel (SS) that does not corrode when exposed to water, acids, or cleaning agents.
- Finish: smooth surfaces and tight, finished welds in which no residue can remain.
- Construction: few hollow spaces, openings, and hard-to-reach corners where dirt accumulates.
- Cleanability: A model that can withstand high-pressure cleaning or washdown, in accordance with the production site’s cleaning protocol.
- Lubrication: For food-contact applications, preferably use lubricants that are suitable for occasional contact with food.
In a cleanroom, there is an additional requirement that the cart must release few to no particles, which is particularly important for wheels and bearings. The standards and classes mandated by your industry ultimately determine how strictly these requirements are enforced.
What is the difference between AISI 304 and AISI 316 stainless steel?
The main difference is corrosion resistance: AISI 316 contains molybdenum and is therefore more resistant to chlorides, salt, and aggressive cleaning agents than AISI 304. AISI 304 is more than adequate for many standard applications and is usually more cost-effective, while AISI 316 is the preferred choice for more demanding conditions.
When is AISI 304 sufficient?
AISI 304 is suitable for environments with normal humidity levels and mild cleaning agents, such as dry packaging areas, bakeries, or light food processing facilities. The material is strong, easy to clean, and more cost-effective. As long as there is no prolonged contact with salt or chlorine-containing products, 304 is often a sensible choice.
When should you choose AISI 316?
An AISI 316 pallet truck is the better choice when it comes into contact with salt, brine, acids, or chlorine-based disinfectants. Examples include meat processing, fish processing, and dairy facilities that require intensive cleaning, as well as the chemical industry and coastal locations. The higher purchase price is often recouped through a longer service life in harsh conditions.
Is a fully stainless steel pallet jack always necessary?
No, a fully stainless steel pallet truck isn’t always necessary. In dry or slightly damp areas, a model with a galvanized chassis—or a partially stainless steel model—is often sufficient. Fully stainless steel becomes necessary in cases of frequent wet cleaning, direct product contact, or strict hygiene requirements.
To determine which model is right for you, please answer the following questions:
- Is the area wet-cleaned or hosed down, and how often?
- Will the pallet truck come into contact with open products, salt, or acids?
- What hygiene protocols or certifications are in place at your facility?
- Does the car drive between dry and wet areas, or does it stay in one area?
An interim solution is a model made partially of stainless steel or with a coating for the dry areas, supplemented by a fully stainless steel truck for the washdown areas. This allows you to keep your investment to a minimum without compromising hygiene where it really matters. You can find an overview of the available models in our pallet truck section.
Which wheels and bearings are suitable for wet and cleaned areas?
In wet and cleaned areas, corrosion-resistant wheels and bearings are essential: polyurethane or nylon wheels with stainless steel or plastic bearings. Ordinary steel bearings rust quickly due to moisture and cleaning agents, causing the cart to become difficult to maneuver and posing a hygiene risk.
The most commonly used options are:
- Polyurethane wheels: run quietly, protect the floor, and are highly resistant to water and many cleaning agents.
- Nylon wheels: hard and chemical-resistant, suitable for heavier loads and more aggressive environments.
- Stainless steel or plastic bearings: remain functional under washdown conditions and do not rust.
- Non-marking wheels: important for slippery or color-sensitive floors in food-processing and cleanroom environments.
Also consider how it works with the floor. In areas with drainage channels, slopes, or wet concrete, traction plays a major role in the operator’s safety.
How do you properly clean and maintain a stainless steel pallet jack?
It is best to clean a stainless steel pallet jack after each shift or according to the cleaning protocol, using water and a suitable, non-corrosive cleaning agent, followed by thorough rinsing and drying. Regular maintenance of the wheels, bearings, and hydraulic system prevents malfunctions and extends the pallet jack’s service life.
A practical approach consists of a few standard steps:
- Remove any large debris and product residue beforehand.
- Clean with a cleaning agent that is compatible with the selected type of stainless steel, and avoid using chlorine-based products on AISI 304.
- Rinse thoroughly to ensure that no chemical residues remain.
- Let the cart air dry or wipe it dry, especially at the front of the forks and around the wheels.
- Check the wheels, bearings, and welds for wear, scratches, or damage where dirt can accumulate.
Do not use steel brushes or abrasives, as they can leave behind loose steel particles and cause rust. A regular maintenance schedule, supplemented by a maintenance contract, ensures that the vehicle continues to operate safely and hygienically.
How does a company choose the right stainless steel pallet truck for its specific needs?
A company selects the right stainless steel pallet truck by first assessing the environment, cleaning regimen, and load capacity, and then choosing the appropriate material, wheels, and design based on those factors. A field test using the company’s own pallets and flooring provides the most reliable confirmation.
When making your choice, keep these criteria in mind:
- Industry and hygiene standards: the food, pharmaceutical, chemical, and cleanroom sectors each have different requirements.
- Stainless steel grade: AISI 304 or AISI 316, depending on the presence of salt, acids, and cleaning agents.
- Load capacity and pallet size: Check the length, width, and weight of your pallets.
- Floors and walkways: whether they are slippery, wet, sloped, or have drainage channels affects the choice of wheels.
- Ergonomics: A lightweight, easy-to-maneuver cart reduces physical strain and employee absenteeism.
- Maintenance: long-term availability of parts and service.
Those who have multiple pallet-handling situations at a single site sometimes choose different models for each zone. This is often cheaper and more efficient than a single, expensive solution for everything.
How Logitrans Handling Helps with a Stainless Steel Pallet Truck
We help companies find the stainless steel pallet truck that suits their hygienic production environment, without oversizing or undersizing it. As experts in ergonomic material handling, we guide you from analysis through commissioning, and remain available for maintenance afterward.
Specifically, we offer:
- a free workstation analysis at your location, during which we assess hygiene requirements, cleaning procedures, and traffic patterns;
- advice on the right type of stainless steel, wheels, and bearings for your industry;
- the opportunity to test models in our demo room in Drongen, using your own pallets;
- user training upon delivery, to ensure the vehicle is used correctly and ergonomically;
- A maintenance contract to keep your pallet trucks safe and in top condition.
Not sure which stainless steel pallet truck is best suited for your production environment? Feel free to contact us—we’d be happy to help you figure it out.
Related Articles
- What kind of lifting aid do you need for 20-, 25-, or 50-kg bags?
- Regulations on Manual Lifting: How Many Kilograms Is an Employee Allowed to Lift?
- How can I reduce absenteeism due to physical strain in my warehouse?
- What are the biggest time wasters in order picking?
- How do I lift boxes ergonomically in a logistics setting?