High-lift pallet jack or stacker: What's the difference?

Lies Decock ·

A high-lift pallet jack lifts a pallet just enough to move it horizontally and bring it to working height, while a stacker also lifts the pallet into racks and stacks it. The pallet jack is a transport device with limited lifting height; the stacker is a stacking device with a mast.
The choice depends mainly on how high you need to work and how often you move pallets. Below, we answer the questions companies most frequently ask when making this decision.

How high can a high-lift pallet jack actually lift?

A high-lift pallet jack typically lifts to about 80 centimeters, depending on the model. That is sufficient to raise a pallet to working height, for example, for loading and unloading a workbench or machine. However, that height is too limited for storing pallets on racks.

The lifting height of a standard pallet jack is usually limited to just a few centimeters. A high-lift pallet jack goes further, with a scissor mechanism that raises the pallet to a comfortable working height. This way, employees don’t have to constantly bend over to remove boxes, bags, or parts from the pallet.

An overview of pallet trucks shows just how wide the selection is, ranging from simple manual pallet trucks to electric models with extra lift height. Always check the maximum lift height and load capacity in the technical specifications for the specific model.

What is the design difference between the two devices?

The key design difference lies in the lifting mechanism: a high-lift pallet jack uses a scissor mechanism beneath the forks, while a stacker uses a vertical mast along which the forks move upward. As a result, a stacker can reach much greater heights, while the pallet jack remains more compact and maneuverable.

The pallet jack is built around a low chassis and two forks that slide under the pallet. The lifting range is limited, which makes the unit simple, robust, and inexpensive to maintain. It is primarily designed for horizontal transport and workstation-based applications.

A stacker has a mast, often with one or more lifting stages, and support legs or a counterweight to stabilize the load. This makes the machine heavier and larger, but also suitable for stacking pallets or placing them on shelves. An electric stacker uses a battery for both lifting and driving, which significantly reduces the physical strain on the user.

When should you choose a high-lift pallet jack?

You should choose a high-lift pallet jack when pallets are primarily moved horizontally and need to be accessible at a comfortable working height, without having to stack them or place them on racks. It is the logical choice for assembly, order picking, and supplying workstations.

Typical situations include:

  • Production lines where parts must be positioned at working height to avoid bending over
  • Order picking of boxes or bags onto a pallet
  • Short transport distances within a workshop or warehouse
  • Areas with limited space to maneuver, such as narrow hallways

Even those who wonder whether a stacker is really necessary will often find the answer here. As long as you don’t need to work higher than about one meter, a high-lift pallet jack is usually the simplest and most cost-effective solution. For specific pallet-handling tasks in practice, it’s worth taking a thorough look at the workstation first.

When is a stacker the better choice?

A pallet stacker is the better choice when you need to store pallets on racks, stack them on top of each other, or place them at heights above working level. A pallet stacker also offers clear advantages over a pallet jack when regularly loading and unloading pallets on multiple levels.

Consider using a stacker in the following situations:

  • You work with pallet racks and need to place pallets on different levels
  • You stack pallets to save floor space
  • You need a greater lifting height than a scissor mechanism can provide
  • You frequently move heavy loads, and an electric stacker takes the strain off you

A pallet stacker is not a substitute for a forklift in a large, high-volume warehouse, but it bridges the gap between a simple pallet jack and a full-fledged forklift. For smaller storage areas and workshops, it is often the most practical solution. Anyone looking to buy a pallet stacker should first consider the required lifting height, the weight of the pallets, and the available aisle width.

What safety and ergonomic differences come into play?

Both pieces of equipment reduce physical strain, but in different ways: the high-lift pallet jack reduces bending and lifting at the workstation, while the stacker reduces heavy pushing, pulling, and manual stacking. Safety with both depends on stability, training, and proper use.

With a high-lift pallet jack, the focus is on ergonomic pallet handling at the workstation. Because the pallet is at a comfortable height, the strain on the back and shoulders is reduced. The risk of tipping over is low, as the lifting height is limited.

With a stacker, stability is even more important because the load is raised to a height. Therefore, always check the following:

  • The maximum load capacity at the desired lift height, which may be lower than the rated capacity
  • The quality of the subgrade, which must be level and have sufficient bearing capacity
  • User training, especially for electric models
  • Regular inspection and maintenance of the equipment

A well-maintained machine remains safe and reliable. A maintenance contract helps prevent accidents and minimize downtime.

How much does a stacker cost compared to a high-lift pallet jack?

A high-lift pallet jack is generally less expensive to purchase than a stacker because its design is simpler. An electric stacker costs more due to the mast, battery, and electronics. Exact prices depend on load capacity, lift height, and model, so always request a customized quote.

When comparing options, don't just look at the purchase price; consider the total cost over the product's lifespan:

  • Purchase: The price of the pallet jack is lower, while that of the stacker is higher
  • Maintenance: A mechanical scissor lift requires less maintenance than a mast lift with a battery and hydraulic system
  • Productivity: A pallet stacker can save you time if you're stacking a lot of pallets or placing them on racks
  • Absenteeism: Ergonomic aids reduce back pain, which saves costs in the long run

The cheapest solution isn't always the best. A pallet jack that isn't tall enough leads to detours and manual labor, while an oversized pallet jack wastes money and space. The right choice depends on your workflow.

How Logitrans Handling Helps You Choose Between a Pallet Jack and a Stackers

As specialists in ergonomic material handling, we help you make the right choice based on your specific situation, not on standard advice. We take a close look at your workstation, your pallets, and your goals. Our wide range of products allows us to provide unbiased advice.

Here's what you can expect from us:

  • A free workstation analysis to determine the lift height and load capacity you actually need
  • Test setups in our demo room in Drongen, so you can test the equipment with your own pallets
  • Advice on Ergonomics and Semi-Automation of Pallet Handling
  • User training upon delivery and a service and maintenance contract to ensure a safe and reliable unit

Are you still deciding between a high-lift pallet jack and a stacker? Feel free to contact us with no obligation, and we’ll work with you to find the solution that best fits your workflow.

Related Articles