How do you safely load heavy rolls of film onto a packaging machine?

Lies Decock ·

You can safely place heavy rolls of film onto a packaging machine using a mechanical lifting aid—such as a vacuum lifter, a roll manipulator, or a mobile lifter—rather than relying on manual strength. The lifting aid bears the entire weight; the operator only guides the process. This helps prevent back injuries and damage to the rolls.
The right choice depends on the roll weight, the height of the suspension, and the distance to the machine. Below, we’ll walk you through the risks, the lifting aids, and the procedure step by step.

What are the risks associated with manually loading rolls of film?

Manually loading rolls of film primarily causes strain on the back, shoulders, and wrists, and increases the risk of falls and entrapment. A roll weighing 20 to 50 kilograms is often placed at an awkward height or while bending over, which further increases the strain.

The main risks at a glance:

  • Back and shoulder injuries: Repeatedly lifting and twisting while carrying a load can eventually lead to symptoms and time off work.
  • Hand and finger entrapment: when inserting the core shaft or sliding the roller against the machine frame.
  • Falling rolls: A roll that slips out of your hands can hit your feet or legs.
  • Product damage: A roll that has been dropped or handled roughly will sustain edge damage, causing the film to tear later or unroll unevenly.
  • Downtime and delays: a difficult changeover costs production time.

So, if you want to prevent back problems on the packaging line, you should start by eliminating heavy lifting—not just by working on your posture.

What tools are suitable for installing rolls of plastic sheeting?

Suitable equipment for handling rolls of film includes vacuum lifters with roll grippers, mobile lifters, roll manipulators, hoists on rail systems, and pulling devices for transport. The appropriate equipment depends on the weight, the roll dimensions, and the space around the machine.

The most commonly used options are:

  • Vacuum lifter with roll gripper: grips the roll from the outside or through the core and lifts it gently and without damage to the machine.
  • Mobile lifter: a mobile device that picks up the roll, lifts it, and positions it in front of the machine; ideal when multiple machines share the same lifter.
  • Rail system with hoist: a fixed or overhead solution that moves rollers along a fixed route from storage to the machine.
  • Roll manipulator: a specialized device that tilts or rotates the roll to the desired installation position.

An overview of the available vacuum lifters and hoists shows which models are suitable for your roll weight. If you’d like to explore roll handling in greater detail, you’ll find additional background information under “Roll Handling.”

How do you choose between a vacuum lift and a mobile lift?

Choose a vacuum lifter when rolls with a smooth, solid exterior need to be moved frequently and quickly within a limited range. Choose a mobile lifter when the roll needs to be moved over longer distances or to multiple machines, or when there is no overhead structure available for a hoist.

When is a vacuum lifter appropriate?

A vacuum lifter works best when the surface of the roll is airtight enough to provide reliable suction and when the operator can maneuver the roll with one hand. The main advantage is speed: the roll is picked up and set down without a chain, hook, or additional fasteners. Be sure to check whether the roll’s material (such as porous or very rough packaging) is suitable for vacuum gripping.

When is a mobile lift appropriate?

A mobile lift is the logical choice if the storage area is located far from the machine or if a single unit needs to serve multiple packaging lines. It does not require a fixed installation above the machine and can both move and lift heavy rolls. Pay attention to the turning radius and the floor: a flat, obstacle-free path is important for stable operation while carrying a heavy load.

If you're unsure which one to choose, a workstation analysis can help you weigh the factors of weight, frequency, distance, and environment. Also check out the mobile lifts to compare the options.

What steps are involved in a safe role change on the machine?

A safe roll change involves five standard steps: safely shutting down the machine, removing the empty core, lifting the new roll with the lifting device, positioning it precisely and locking it in place, and finally feeding in the film and testing it. By establishing this sequence, every roll change remains predictable and safe.

  1. Shut down the machine safely. Turn it off, lock it out according to the applicable procedure, and wait until all moving parts have come to a complete stop.
  2. Remove the empty core or remaining roll. Use the lifting aid for this as well, especially for remaining rolls that are still heavy.
  3. Install the new roll. Before lifting, make sure the gripper or support arm is properly positioned and that the roll is securely suspended.
  4. Position and lock in place. Slowly slide the roller onto the shaft, check the alignment, and lock the clamps or bearings.
  5. Load the film and test it. Run the machine at low speed to check that the roll feeds straight and without vibration.

At every step, keep your hands out of the pinch zones and never allow the operator to stand under a suspended load. A brief, clear instruction provided at the machine helps new employees quickly learn this sequence.

How can rolls of film be safely transported to the machine?

Film rolls must be transported safely using a lifting or pulling device that holds the roll securely in place along a flat, unobstructed path. The roll must be kept low to the ground, must never be rolled across the ground, and must not be released until it has been safely set down.

A few practical arrangements can make all the difference:

  • Clear and level route: Remove any obstacles, thresholds, and loose material between the storage area and the machine.
  • Stable storage: Store rolls horizontally or on racks that prevent them from tipping over or rolling away.
  • Minimize the distance: Place the roll storage as close to the machine as possible to reduce the number of steps required.
  • The right lifting equipment for the weight: use lifting slings or a pallet jack for palletized rolls, and a lift truck for loose rolls.

A well-planned route not only saves effort but also reduces the risk of the rolls being damaged along the way.

How can you ensure that lifting aids are used safely and reliably?

Lifting equipment remains safe and reliable through regular inspections, preventive maintenance, and proper use by trained operators. A piece of equipment that is not inspected may fail unexpectedly, just when a heavy load is attached to it.

Follow these basic rules:

  • Daily visual inspection: Check the hoses, grippers, chains, wheels, and controls before using the machine.
  • Periodic maintenance and inspection: Have the appliance inspected by a qualified professional in accordance with legal requirements and the manufacturer's instructions.
  • Observe the maximum load limit: never exceed the specified load capacity, not even “just for a moment.”
  • Train the operators: Everyone who operates the equipment must be familiar with how it works, the emergency procedures, and its limitations.
  • Report defects immediately: Take a damaged device out of service right away until it is repaired.

A maintenance contract ensures that these inspections are not overlooked and that your lifting equipment is always ready when production needs it.

How Logitrans Handling Helps Ensure the Safe Placement of Film Rolls

We support you throughout the entire process, from analysis to maintenance, so that heavy film rolls are loaded onto your packaging machine without causing physical strain. As experts in ergonomic material handling, we assess your situation and propose a solution tailored to your rolls, your machine, and your employees.

Specifically, we can do the following for you:

  • Conduct a free workstation analysis to assess workload, frequency, and routes.
  • Recommend the appropriate lifting aid, such as a vacuum lifter, mobile lift, or rail system with a hoist.
  • Try it out in our demo room in Drongen, using your own rolls of film.
  • Train users upon installation or delivery of the solution.
  • Keep your equipment in top condition with a maintenance contract.

Would you like to know which solution is best suited for your packaging line? Feel free to contact us, and together we’ll explore how we can make loading your film rolls safer and more efficient.

Related Articles